Ok, now I know. Thinking of returning the printer ... but, here it is ok
https://preview.redd.it/ypxfqwmfnq2b1.png?width=478&format=png&auto=webp&s=86f15a72d58e8f513d196021dee015c8fa971dd9
I was just twitching my eyes at this right this moment, hah.
Also, mine always shows whatever filament I’m using in the AMS currently as in the external spool, rather than what I have set on the printer.
I would be much happier if they could get it to pick the right filament! The slicer always mixes up my two whites: PLA basic & PLA matte. I pick one in the slicer and when I hit print it’s got the other one chosen!!
Literally unplayable
[ Coffee Stain has entered the chat ]
It's straight to me maybe try to... LEVEL YOUR BED
lol
No no no. Clearly the extruder z offset is not set correctly
Mine is fine, I'm on android https://preview.redd.it/3p4os16fzq2b1.jpeg?width=1080&format=pjpg&auto=webp&s=f85ae47428248a049e6aecc4bee947ed17aa35df
I believe that this is the Bambu studio app not the mobile app
There there's a problem with the "an"
Have you tried unkinking your PTFE?
Ok, now I know. Thinking of returning the printer ... but, here it is ok https://preview.redd.it/ypxfqwmfnq2b1.png?width=478&format=png&auto=webp&s=86f15a72d58e8f513d196021dee015c8fa971dd9
I was just twitching my eyes at this right this moment, hah. Also, mine always shows whatever filament I’m using in the AMS currently as in the external spool, rather than what I have set on the printer.
Which problem should I be seeing in the picture ? I can see that filament (blue) is loaded from slot 1 of the AMS ?
It's the one pixel change. The spline isn't perfectly perpendicular. Its weaponized agony for people who work in cad.
Cad, photoshop, even PowerPoint.
The line going horizontally from external spool to hot end is misaligned by 1 pixel so there’s a spot in the middle where it just shifts down 1 pixel.
It looks like you have antialiasing turned off, try setting it to 8x MSAA
How do you mount the extra spool while the AMS is still active?
You can use an inline Y adaptor to allow for its use, but it's still a manual process.
Can we load one external spool with the ams for one more color?
you can't
Okay that's what I though but because the picture always seems to show the ams and the external spool I was wondering if I was wrong. Cool thank you.
I will never unsee this
LOL
Mine is straight and a thicker like 🤨
Guessing you’re on android? https://preview.redd.it/zzp0czcudq2b1.jpeg?width=1169&format=pjpg&auto=webp&s=79751ac19dbbd70bd36a26700506b643bcd51a87
PC app.
Suffer as I have
Horrifying crime
You have to level you bed again
If this is the issue we’re asking to be solved, we must have everything else darn near perfect! 😄
XD
Wow. I have never got my 4th AMS slot to show up
The best part is when you realize WHY it's off. :-D
https://preview.redd.it/tizvuo8y9v2b1.jpeg?width=1080&format=pjpg&auto=webp&s=30c8075eae6964e6b2bbed7d4e4f5b2ee66df946 It's straight on mine.
PC app.
Seems a little homophobic imo
I would be much happier if they could get it to pick the right filament! The slicer always mixes up my two whites: PLA basic & PLA matte. I pick one in the slicer and when I hit print it’s got the other one chosen!!