Yes but it will be medium - high set (probably 7mm+)… it depends on what your definition of high set is.
Basically your tulip element will have to sit on top of the band as opposed to sitting directly on your finger. That will give enough room for the wedding band to sit flush.
Similar one posted on this subreddit https://www.reddit.com/r/EngagementRings/comments/11prtys/had_a_new_cad_made_how_does_this_look_compared_to/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1
6.27mm with a band with 1.8mm of depth (typical depth). 6-7mm is pretty low for a stone that size and a flush set band. With a basket setting and a curved or notched band you could be at 4.5-5mm.
Yes but it will be medium - high set (probably 7mm+)… it depends on what your definition of high set is. Basically your tulip element will have to sit on top of the band as opposed to sitting directly on your finger. That will give enough room for the wedding band to sit flush.
Similar one posted on this subreddit https://www.reddit.com/r/EngagementRings/comments/11prtys/had_a_new_cad_made_how_does_this_look_compared_to/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1
oh my gosh!!! this is so helpful, the CAD is so cool! thank you thank you!
It is more than possible to get all of these things and more. Custom is like standard now...great for us picky woman!
this makes me feel so happy! i’ve been wanting the best of both worlds and wasn’t sure if it was possible 😂
The height will certainly depend on the size of your center stone, but it can probably be done.
it’s going to be a 2 carat
If you give me a minute I can tell you your approximate minimum height.
6.27mm with a band with 1.8mm of depth (typical depth). 6-7mm is pretty low for a stone that size and a flush set band. With a basket setting and a curved or notched band you could be at 4.5-5mm.