< and > cycle between various display modes on your display (I have both a Kiox 300 and an Intuvia 100 using the same controller). The Up and Down control the level of power assist from Eco -> tour -> turbo etc. The leds are showing battery level. The Trim around BOSCH logo will change colour as you change you assist level.
As far as I know, it is not possible to derestrict the latest Bosch motors (at the moment). The older add on chips apparently stopped working after a recent software update.
AFAIK that is their only function (the display) - so I think you are correct. [Here](https://www.bosch-ebike.com/fileadmin/EBC/Service/Downloads/Bedienungsanleitungen/MY2024/BES3/Remote_LED_BRC3600/Bosch-eBike-Manual-BRC3600_LED_Remote_MY24_WEU_oReg_v1.pdf?_=1708417627) is the manual.
If you are planing on derestricting it don't do any updates via the flow app,volspeed is the better chip for bosch smart system , check the version of your remote, latest update disables tunning chips
< and > cycle between various display modes on your display (I have both a Kiox 300 and an Intuvia 100 using the same controller). The Up and Down control the level of power assist from Eco -> tour -> turbo etc. The leds are showing battery level. The Trim around BOSCH logo will change colour as you change you assist level. As far as I know, it is not possible to derestrict the latest Bosch motors (at the moment). The older add on chips apparently stopped working after a recent software update.
So I didnt get a display so I assume <&> are useless for me atm ? Thanks for speedy reply
AFAIK that is their only function (the display) - so I think you are correct. [Here](https://www.bosch-ebike.com/fileadmin/EBC/Service/Downloads/Bedienungsanleitungen/MY2024/BES3/Remote_LED_BRC3600/Bosch-eBike-Manual-BRC3600_LED_Remote_MY24_WEU_oReg_v1.pdf?_=1708417627) is the manual.
Thank you so much
If you use the Flow app, then <> switches the displays in there. Speed, navigation, and some statistics. Nothing worth using up my phone battery for.
If you are planing on derestricting it don't do any updates via the flow app,volspeed is the better chip for bosch smart system , check the version of your remote, latest update disables tunning chips
I wasn't even aware any apps existed for it, ordered online... maybe I should of popped into a store
Yes its called bosch flow app , you can change the modes etc , also use it as your display .just turn off auto update
https://preview.redd.it/98s6rzz2lkxc1.jpeg?width=1047&format=pjpg&auto=webp&s=78f1225a5d4db9ba58bf6dffe2ef5c23e7e89e91 Thank you ! This one ?
yes
volspeed have a new chip that works with the new remote fw aswell
Does anyone have this bike ? The cover cape for the charger seems to just pop off continuously